No products in the cart.
9V to 2.1mm Barrel Jack Adapter V2
- Material for the 9V battery jack is hard plastic
- Can plug a 9V battery into one end and connect the other end
- Works great for Arduinos, development boards, evaluation boards and more
- Use this cable to battery-power any device that needs 9V and has an on-board barrel jack
Price range: 39,00 € through 39,99 €9V to 2.1mm Barrel Jack Adapter V2
Price range: 39,00 € through 39,99 €FingerTech ‘Viper’ Combat Robot Kit V2 w/ Transmitter and Charger
- Plenty of strength and space for additional components and upgrades
- Four channels free to add any active devices you desire
- Polycarbonate combat armor keeps the components safe
- Base weight is only 313grams – 1lb (US Antweight) kit
- Ages: 10+
57,99 €62,35 €12V, 1.7A, 667oz-in NEMA-17 Bipolar Stepper Motor
- Bipolar stepper motor with planetary gearbox
- 0.018° step angle and 48 kg·cm of torque at low speeds
- Step accuracy: ± 5 %
- Comes with the rear shaft exposed
42,39 €12V, 350mA, 28oz-in NEMA-17 Bipolar Stepper Motor
- 4-wire bipolar stepper motor with 1.8° per step
- Specified to have a maximum current of 350mA
- Holding torque: 28 oz-in
567,99 €679,80 €12V, 350mA, 28oz-in NEMA-17 Bipolar Stepper Motor
567,99 €679,80 €DFRobotShop Rover V2 – Arduino Compatible Tracked Robot (Basic Kit)
- Versatile, programmable robot tank kit
- Onboard LiPo battery charger
- Complete Arduino board built-in (Arduino Uno)
- Dual H-bridge and onboard voltage regulator (only one battery needed)
- Compatible with a variety of shields
- Two XBee areas (2mm 10pin XBee Socket sold separately) and solder prototyping area
- No soldering required
- Please verify the polarity of the connector before using this battery as it may differ from the image
822,70 €AndyMark NeveRest Orbital Gearbox 50.9:1
- AndyMark NeveRest Orbital Gearbox
- Ratio: 50.9:1
- Compatible with 17 Tooth NeveRest Motors
- Accommodates a 1/2 inch Hex output shaft with an adapter
- Features a unique 4 M3x0.5 inch mounting geometry
105,30 €Actuonix Linear Actuator Control Board
- Actuonix Linear Actuator Control Board
- Designed for Actuonix actuators
- Controls one linear actuator
- Supported input signals include USB, Voltage, Current, RC Servo, and PWM
- Onboard adjustment of speed, sensitivity, and stroke limits
55,30 €DHT11 Temperature and Humidity Sensor Module
- Type: Digital temperature and humidity sensor, compatible with Arduino and Raspberry Pi for versatile use in various projects.
- Sensing Capabilities: Measures temperature and humidity with reasonable accuracy, providing reliable environmental data for monitoring and control applications.
- Interface: Designed with a simple digital interface, making it easy to connect and integrate with microcontrollers like Arduino and single-board computers like Raspberry Pi.
- Operating Range: Typically operates within a temperature range of 0-50°C and a humidity range of 20-80% RH, suitable for general environmental monitoring.
- Module Design: Comes as a compact module with built-in circuitry, simplifying the integration process and minimizing the need for additional components.
- Applications: Ideal for home automation, weather stations, environmental monitoring, and other projects where temperature and humidity data are required.
125,30 €Li-Ion Rechargeable Battery Flat-Top 3.7V 800mAh
- Type: Lithium-Ion (Li-Ion) rechargeable battery, known for its high energy density and long cycle life.
- Voltage: 3.7V, providing a stable output voltage suitable for various electronic devices and applications.
- Capacity: 800mAh, indicating the battery’s ability to store and deliver 800 milliampere-hours of charge, affecting the runtime and performance of devices.
- Design: Flat-top design, which may include flat terminals or contacts for specific applications and device compatibility.
- Rechargeable: Capable of being recharged multiple times, offering a cost-effective and eco-friendly alternative to disposable batteries.
- Applications: Suitable for use in a wide range of portable electronics, such as handheld devices, small gadgets, and battery-powered equipment.
- Features: Typically features overcharge protection and thermal management to enhance safety and longevity of the battery.
1 025,50 €1 422,70 €Li-Ion Rechargeable Battery Flat-Top 3.7V 800mAh
1 025,50 €1 422,70 €Reduction Motor Mini N30 Brushed DC Motor Gearbox
- Type: Mini N30 brushed DC motor with an integrated gearbox, designed for applications requiring high torque and precise control.
- Voltage: 12V, suitable for various low-voltage DC power sources, with a performance focus at 3V for specific applications.
- Speed: 1000 RPM (revolutions per minute) at the specified voltage, providing a balance between speed and torque.
- Gearbox: The integrated gearbox reduces the motor’s speed while increasing its torque output, making it ideal for applications where high torque is essential, such as in actuators and small mechanical systems.
- Application: Commonly used in micro drones, actuators, robotics, and other compact devices where space is limited but reliable power and torque are required.
- Design: Compact and lightweight, making it suitable for tight spaces and portable applications.
- Features: High torque output despite its small size, offering reliable performance in demanding tasks. The brushed design allows for straightforward control and operation in various electronics projects.
45,90 €62,60 €Reduction Motor Mini N30 Brushed DC Motor Gearbox
45,90 €62,60 €Super Debug E18-D80NK Infrared Photoelectric Switch – Obstacle Avoidance Sensor Module
- Type: Infrared photoelectric switch designed for obstacle avoidance applications, utilizing infrared light to detect objects and measure distances.
- Sensing Range: Capable of detecting obstacles within a specific range, making it suitable for proximity sensing and collision avoidance.
- Module Design: Comes as a compact module, facilitating easy integration into various electronic and robotic systems.
- Infrared Technology: Utilizes infrared light to sense the presence of obstacles, providing reliable detection in diverse environments.
- Applications: Ideal for use in robotics, automation systems, and other applications where obstacle detection and avoidance are critical.
- Ease of Use: Designed for straightforward implementation and adjustment, making it accessible for both hobbyists and professionals.
36,78 €Air:bit 2 Programmable Drone Kit Standard w/o micro:bit
- Air:bit 2 Standard w/o micro:bit
- DIY STEAM Quadcopter Drone for education
- Designed for micro:bit (Not Included)
- Includes 1x Wonder Kit black
- Build, code, and fly
- Lets you create your own remote control
- Features a brand new steering card
599,60 €
